|
| Range (min. set range) |
|---|
| LA | - 1...1 kPa (0,05 kPa) |
| LB | - 5...5 kPa (0,13 kPa) |
| LC | - 50...50 kPa (0,42 kPa) |
| LD | -250...250 kPa (2,08 kPa) |
| LF | -2500...2500 kPa (20,83 kPa) |
| HC | - 50...50 kPa (0,42 kPa) |
| HD | -250...250 kPa (2,08 kPa) |
| HF | -2500...2500 kPa (20,83 kPa) |
| HH | -25...25 MPa (0,21 MPa) |
|
| Membrane material / fill fluid |
|---|
| 11 | Stainless steel 316 (1.4404) / silicone oil (1) |
| 13 | Stainless steel 316 / fluorocarbon oil (2) |
| H1 | Hastelloy C-276 / silicone oil (1) |
| H3 | Hastelloy C-276/ fluorocarbon oil (1) (2) |
| M1 | Monel 400 / silicone oil (3) (1) |
| T1 | Tantalum / silicone oil (3) (1) |
| T3 | Tantalum / fluorocarbon oil (3) (2) |
| 1C | Stainless steel 316 / halocarbon 4.2 (3) (2) |
| HC | Hastelloy / halocarbon 4.2 (3) (2) |
| TC | Tantalum / halocarbon 4.2 (3) (2) |
|
| Flanges, adapters, and fasteners material |
|---|
| C | Carbon steel (stainless steel 316 drain valves) |
| 1 | Stainless steel 316L |
| H | Hastelloy |
| M | Monel |
| P | Stainless steel 316 with PVDF (polyvinylidene fluoride) inserts (2) (4) (5) (6) |
|
| Seal material |
|---|
| 0 | Without seals (only when using remote seals) |
| 1 | Viton (FKM) |
| 3 | Ethylene / propylene (EPDM) |
| 5 | Buna - N (NBR) |
| 7 | Kalrez (FFKM) (3) |
| 8 | Teflon |
|
| Position of drainage valves |
|---|
| 0 | Without drainage valves |
| U | Top |
| D | Bottom |
| A | Opposite process connection |
|
| Display |
|---|
| 0 | No |
| M | LCD |
|
| Mechanical connection |
|---|
| 0 | 1/4 - 18 NPT without adapter |
| 1 | 1/2 - 14 NPT with steel 316L adapter |
| 5 | 1/2 - 14 NPT with PVDF insets (4) (5) |
| 6 | 1/4 - 18 NPT with small size flange (4) (7) (8) (2) |
| 7 | Side connection (4) (7) (8) |
| 8 | Small amount of flange assembly (welding) of remote seals (4) (7) (8) |
|
| Electrical connection (cable entry) |
|---|
| N | 1/2 - 14 NPT |
| M | M20x1,5 |
| P | PG 13.5 DIN |
|
| The LRL and MR setting |
|---|
| 1 | Standard (with the possibility of the setting at the place, the magnetic pen is ordered separately) |
|
| Fixing connection |
|---|
| 0 | No |
| K11 | Bracket and accessories made from carbon steel (for pipe 50 mm) |
| K21 | Bracket and accessories made from stainless steel 316L (for pipe 50 mm) |
| K12 | Angle bracket and accessories made from carbon steel (on plane) |
| K22 | Angle bracket and accessories made from stainless steel 316L (on plane) |
|
| Extras |
|---|
| A1 | Material of bolts and nuts for mounting flanges is stainless steel |
| C1 | Degreasing (measuring pressure of oxygen or chlorine) (9) |
| G1 | 0-20 mA output signal (10) |
| H1 | Stainless steel 316 housing |
| 0R | Standard implementation |
